跳至主要内容

Three tips during using defoamers in the production.

1. Turbidity of defoamer:

The defoamer is not compatible with the system used, the second is suspended in it. Then the performance of the defoamer will vary greatly due to the different dosage and color of different materials. But as long as the final defoaming effect is good, the foam suppression time is long.

2. Antifoaming time of antifoaming agent:

defoamers

The nature and content of the silicone oil in the defoamer can determine the length of time the defoamer suppresses the foam in the system and the duration of use. The particle size of the antifoaming agent determines the filtration resistance of the antifoaming agent. During the use, the sewage needs to be filtered multiple times. Both the anti-foam effect and the anti-foam effect will have a certain impact.

3. The defoamer fails:

There are many types of defoamers on the market, and different defoamers have different properties. Some defoamers have poor acid and alkali resistance, which can cause the silicone oil to decompose, which can cause the defoamer to fail. Therefore, it is extremely critical to choose the right defoamer for the industry. Only in this way can we do more with less.

for more details please go : www.ywlchemical.com
标签：

评论

发表评论

此博客中的热门博文

The magical effect of fumed silica in silicone rubber

The magical effect of fumed silica in silicone rubber Fumed silica is one of the most important high-tech ultra-fine inorganic new materials. Due to its small particle size, it has a large specific surface area, strong surface adsorption, large surface energy, high chemical purity, good dispersion performance, thermal resistance, It has specific properties in terms of electrical resistance, etc. Its superior stability, reinforcement, thickening and thixotropic properties are unique in many disciplines and fields and have an irreplaceable role. Today, Xiaobian will work with you to learn how to apply fumed silica in silicone rubber. Application of fumed silica in high temperature vulcanization (HTV) silicone rubber The use of fumed silica can be divided into silicone materials and other fields, in which the amount of silica in the silicone material is nearly 60%, and the silicone rubber is the most used material in the silicone material. It can be added in an amount of up to 50% ...
1 条评论
阅读全文

How do we assess antifoam efficiency ?

How do we assess antifoam efficiency ? Quality of an antifoam is given by two main characteristics : • Knockdown ability or shock effect :Meaning the speed to destroy an existing foam. • Persistence or durability : Meaning the efficiency over time.   These two parameters can be assessed by several tests. The main test is the bubbling method. A graduated column with a glass frit in the bottom is required. Foaming water is poured in the column and air at constant flowrate is introduced through the glass frit in the column. Foam is generated by the air and starts to travel up the column. At a determined level of foam, antifoam is injected. By this method several antifoaming agents can be tested. A graph reporting foam height vs time is very helpful to establish the knockdown ability and the persistence for each product. The selected antifoam is the product with the best compromise between shock effect and durability       Environmental performance   Silicone antifo...
1 条评论
阅读全文

Why is there foam in the paint and coating? What we should do to eliminate foam?

Why is there foam in the paint and coating? What we should do to eliminate foam?             check below details:           Surface tension The surface tension of the coating has a great influence on the defoaming agent.  The surface tension of the defoaming agent must be lower than the surface tension of the coating. Otherwise, there is no defoaming and foam suppression. The surface tension of the coating is a variable factor, so a constant surface tension is required when using the defoamer, and then the surface tension variation factor is taken into account. The influence of other additives Surfactants used in coatings are mostly functionally incompatible with defoamers. In particular, emulsifiers, wetting and dispersing agents, leveling agents, thickeners, etc., have an effect on the effect of the antifoaming agent. Therefore, we must pay attention to ...
发表评论
阅读全文