跳至主要内容

What is paper tube glue defoamer and how to use defoamer in the paper tube glue correctly?

What is paper tube glue defoamer and how to use defoamer in the paper tube glue correctly?
The paper tuber adhesive is commonly known as paper tube glue, paper tube glue, etc. It is a special adhesive for making various paper tubes, paper barrels, paper cans and related paper products. Paper, cloth, plastic film, metal foil and other thin soft materials, commonly used paper tube (paper tube) is wound into bundles to make a paper roll core-shaped finished product. These paper tubes are generally rolled and bonded by kraft paper or other raw paper, and the adhesive used is called paper tube glue.
In the production of paper tube glue, PVA, vinyl acetate, polyacrylamide, ethylene glycol, etc. are added in the production. Most of these additives are surfactants, and foams are easily generated when mechanically stirred or subjected to shearing. The presence of foam can have a negative impact on the production process. If the foam is not properly controlled, it will seriously affect the operation of the production and the quality of the product. The addition of paper tube glue defoamer to control the foam is easy to use, easy to operate, and does not change the production process, and is very popular among paper tube glue manufacturers.
In order to make you better understand, I share our customer case here.
So please could you check below details:

Product Code: INVELY-263

Performance characteristics:
  • Good dispersion, good suppression of bubbles;
  • It is suitable for adding and using in viscous and easy foaming system.
paper defoamer

Comparison INVELY-263 and customer sample by air drum in 1% PVA solution

Test condition

  • Temperature: 80 ° C
  • Dosage: drop the tip of the syringe
  • Raw material: 100 ml 1% PVA solution.

Test Method

Wash the air drum test instrument, add 100ml of foaming solution, add defoamer, and then record the foam height at different time periods at the set flow rate (maximum single head flow rate) and temperature. Comparing the defoaming performance of the sample by recording the change in the volume V of the foam over time;

Test Result

defoamer

Conclusion

In 1% PVA solution, the defoaming performance of INVELY-263 is better than customer sample at 80 °C, meeting customer requirements.
Paper tube glue defoamer is made from mineral oil and polyether ester.  It can quickly eliminate the large bubble produced in the production of paper tube glue. It has fast defoaming and foam suppression. The advantages of long, good leveling and low dosage will not affect the product even if it is used excessively.
https://www.linkedin.com/company/china-defoamer
https://www.ywlchemical.com/category/defoamer/

标签

标签：

评论

发表评论

此博客中的热门博文

The magical effect of fumed silica in silicone rubber

The magical effect of fumed silica in silicone rubber Fumed silica is one of the most important high-tech ultra-fine inorganic new materials. Due to its small particle size, it has a large specific surface area, strong surface adsorption, large surface energy, high chemical purity, good dispersion performance, thermal resistance, It has specific properties in terms of electrical resistance, etc. Its superior stability, reinforcement, thickening and thixotropic properties are unique in many disciplines and fields and have an irreplaceable role. Today, Xiaobian will work with you to learn how to apply fumed silica in silicone rubber. Application of fumed silica in high temperature vulcanization (HTV) silicone rubber The use of fumed silica can be divided into silicone materials and other fields, in which the amount of silica in the silicone material is nearly 60%, and the silicone rubber is the most used material in the silicone material. It can be added in an amount of up to 50% ...
1 条评论
阅读全文

How to control foam and defoaming in the papermaking ?

Foam is always a thorny issue in the pulp&paper industry. Foaming reasons   Once liquid which contain a surfactant or this kind of liquid having a large viscosity is agitated, a large amount of foam which is not easily disappeared is often produced. The reasons why these bubbles are more stable and not easy to disappear are as follows: n   Film elasticity The ability of the liquid film to resist local thinning during the general thinning process is film elasticity. When the liquid film has a thin point, this point is a possible breakage. However, when this is further stretched, the surfactant molecules in this part will be more reduced, and the increase in surface tension will result in a force imbalance, and the surrounding surface will be moved toward a thin point to balance the surface. tension. The movement of the surface layer pulls the liquid of the lower layer together, thus preventing further thinning of the initial weakness and, in turn, foam ruptu...
发表评论
阅读全文