Invely-3180 defoamer for paper pulp（black liquor）

It is well known that pulping is the process of separating fiber materials from plants to obtain pulp. In the pulping process, a large amount of foam will be produced, affecting the production efficiency and the quality of the pulp board.

The role of defoamers in the pulp industry is very critical. It is used to prevent various problems caused by foam during the pulp washing process, such as slurry overflow tank, reducing the efficiency of the pump, the formation of deposits on the paper, pulp water filtration Problems, etc.

Invely defoamer 3180 uses innovative silicone chemistry to achieve superior foam suppression. It can be used in black liquor without depositing on paper, improving water filtration performance and effectively helping pul p mills Improve efficiency. Invely-3180 improves production efficiency while reducing total operating costs. Invely-3180 is specially designed for pulp and is also recommended for industrial cleaning, wastewater treatment, pesticides and other applications.

Features:

High content silicone emulsion defoamer
Long-lasting foam suppression under strong alkali and high temperature
Good dispersion in pulp black liquor, improve productivity and pulp quality
Reduce TCO by reducing chemical use, saving water and energy

Dispersion of defoamer in black liquor
Comparison chart defoamer for paper pulp black liquor

此博客中的热门博文

The magical effect of fumed silica in silicone rubber

The magical effect of fumed silica in silicone rubber Fumed silica is one of the most important high-tech ultra-fine inorganic new materials. Due to its small particle size, it has a large specific surface area, strong surface adsorption, large surface energy, high chemical purity, good dispersion performance, thermal resistance, It has specific properties in terms of electrical resistance, etc. Its superior stability, reinforcement, thickening and thixotropic properties are unique in many disciplines and fields and have an irreplaceable role. Today, Xiaobian will work with you to learn how to apply fumed silica in silicone rubber. Application of fumed silica in high temperature vulcanization (HTV) silicone rubber The use of fumed silica can be divided into silicone materials and other fields, in which the amount of silica in the silicone material is nearly 60%, and the silicone rubber is the most used material in the silicone material. It can be added in an amount of up to 50% ...

阅读全文

How do we assess antifoam efficiency ?

How do we assess antifoam efficiency ? Quality of an antifoam is given by two main characteristics : • Knockdown ability or shock effect :Meaning the speed to destroy an existing foam. • Persistence or durability : Meaning the efficiency over time. These two parameters can be assessed by several tests. The main test is the bubbling method. A graduated column with a glass frit in the bottom is required. Foaming water is poured in the column and air at constant flowrate is introduced through the glass frit in the column. Foam is generated by the air and starts to travel up the column. At a determined level of foam, antifoam is injected. By this method several antifoaming agents can be tested. A graph reporting foam height vs time is very helpful to establish the knockdown ability and the persistence for each product. The selected antifoam is the product with the best compromise between shock effect and durability Environmental performance Silicone antifo...

阅读全文

Why is there foam in the paint and coating? What we should do to eliminate foam?

Why is there foam in the paint and coating? What we should do to eliminate foam? check below details: Surface tension The surface tension of the coating has a great influence on the defoaming agent. The surface tension of the defoaming agent must be lower than the surface tension of the coating. Otherwise, there is no defoaming and foam suppression. The surface tension of the coating is a variable factor, so a constant surface tension is required when using the defoamer, and then the surface tension variation factor is taken into account. The influence of other additives Surfactants used in coatings are mostly functionally incompatible with defoamers. In particular, emulsifiers, wetting and dispersing agents, leveling agents, thickeners, etc., have an effect on the effect of the antifoaming agent. Therefore, we must pay attention to ...

阅读全文

defoamer-antifoam

搜索此博客