High temperature overflow printing and dyeing defoamer

Defoamer for textile can workable at over 100℃？yes or no?

Printing and dyeing process:
Raw cloth preparation → Singeing → Refining → Bleaching → Setting → Satinization → Dyeing and printing →Finishing.
Here will show INVELY-6200 which is workable over 100℃ with good performance.

Desizing

The main role of desizing: remove slurry as much as possible, creating favorable conditions for subsequent processing.
Common alkali desizing principle: The slurry swells under the action of hot alkaline solution, from the gel state to the sol state, and becomes loose with the fiber, which is easy to wash off. Foaming occurs more during desizing, and the application of defoaming agents is mainly concerned with the pH and temperature of the foaming environment. INVELY-6200 is recommended when the temperature is higher than 90 ° C.

Dyeing

According to the temperature can be divided into: normal temperature dyeing (room temperature), medium temperature dyeing (60-100 ℃), high temperature dyeing (about 130 ℃). Dyeing equipment: dyeing tank, continuous pad dyeing car, high temperature and high pressure overflow dyeing tank, etc.
High-temperature dyeing, requirements for defoamers: long foam suppression time, good acid and alkali resistance, good dispersibility, can not cause silicon spots caused by precipitation. INVELY-6200 is well deserved.

Finishing (after finishing)

Finishing mainly includes tentering, softening and pre-shrinking. Among them, the use of softeners / soft tablets will generate a lot of foam and the temperature is high. Here, defoamers are recommended to pay attention to the softener ion type. Most of the Sister products are anionic and nonionic products.
Below is the defoamer for textile invely-6200 TDS . if you have interested, please could you check, thanks:
Download INVELY-6200-TDS
https://www.linkedin.com/company/china-defoamer
https://www.ywlchemical.com/industries/textiles/

此博客中的热门博文

invely-defoamers

Why Foam could be so inconvenient ? A light foam is generally not problematic in most applications however heavy foaming can often lead to various processing problems. These problems range from inaccurate readings from control and measuring equipment such as temperature, level and density controllers to poor mixing of reactants in chemical reaction vessels and products hanging in the foam, all too often leading to losses in production. Finally the presence of foaming can give a bad image of the way a process is operated in the eyes of a customer. The presence of foam in discharged effluent can cause complaints from local people and authorities even if the foam is harmless to people and the environment. How do silicone defoamers work ? Foam is a gas dispersion in a liquid or solid continuous phase. Foam iscreated by the surfactants which are at the air/liquid interface. Therefore air bubbles occur and are stabilised by the surfactants. Today, silicone antifoams are thebest solution to a...

阅读全文

How do we assess antifoam efficiency ?

How do we assess antifoam efficiency ? Quality of an antifoam is given by two main characteristics : • Knockdown ability or shock effect :Meaning the speed to destroy an existing foam. • Persistence or durability : Meaning the efficiency over time. These two parameters can be assessed by several tests. The main test is the bubbling method. A graduated column with a glass frit in the bottom is required. Foaming water is poured in the column and air at constant flowrate is introduced through the glass frit in the column. Foam is generated by the air and starts to travel up the column. At a determined level of foam, antifoam is injected. By this method several antifoaming agents can be tested. A graph reporting foam height vs time is very helpful to establish the knockdown ability and the persistence for each product. The selected antifoam is the product with the best compromise between shock effect and durability Environmental performance Silicone antifo...

阅读全文

Defoamer Test Method

Defoamer testing methods are divided into dynamic defoaming and static defoaming tests. If your foaming environment is different, the recommended test methods are different. There are three main types of foam experiments to characterize the activity of defoamers. Persistence. As we have different experimental conditions in different laboratories and the experiments used in our research to obtain results from existing literature, we will introduce these experiments below. Other methods are sometimes used depending on the particular application. 1． Ross-Miles Foam Tester Features: Tested for strong foaming environments. This experiment is widely used for characterization (1) Foaming of surfactant solution (2) Research and application of foam stability in the presence of defoamer In the foaming system, the defoaming performance test was carried out by circulating bubbling by a Ros...

阅读全文

defoamer-antifoam

搜索此博客