跳至主要内容

Defoamer in papermaking pulping black liquor


Invely-620D in papermaking pulping black liquor trial application:

Costomer introduction:

A paper mill in Shandong Province has an annual output of 600,000 tons. The raw material is hardwood. The foaming in the black liquor of papermaking is serious. Lead into efficiency of vacuum washing is greatly reduced, which seriously affects the stability of production and the quality of paper products, and even causes the machine to stop. . After Learned our defoamer, sent 20 kg of black liquor to our company for testing and selection, recommended the Invely-620D, the foam was effectively controlled.


Date sheet

Product Name: Defoamer Invely-620D
Key property:
·   Good compatibility, silicone grease does not precipitate and float after moderate dispersion in the system;
·   Easy to disperse in water, good compatibility within the addition;
·   Acid and alkali resistant
Appearance
White Emulsion
Ionic Type
of Emulsion
Weak anion
PH
6.0-7.5
Viscosity (cps)
1000-2000

How to add?

Add method
Metering pump stock solution
Add point
washer, one section, five sections
Total consumption of tons of paper
200-400g/ton

Conclusion

Ø  Effective control of foam in the pulping black liquor system, the thickness of the pulp in the washer is increased, and the sizing rate is effectively improved.
Ø  The cleaning of the pulp is improved, the water filtration is improved
Ø  The concentration of black liquor is reduced, which contributes to the recovery of residual alkali
Ø  The paper index is stable

标签：

评论

发表评论

此博客中的热门博文

How do we assess antifoam efficiency ?

How do we assess antifoam efficiency ? Quality of an antifoam is given by two main characteristics : • Knockdown ability or shock effect :Meaning the speed to destroy an existing foam. • Persistence or durability : Meaning the efficiency over time.   These two parameters can be assessed by several tests. The main test is the bubbling method. A graduated column with a glass frit in the bottom is required. Foaming water is poured in the column and air at constant flowrate is introduced through the glass frit in the column. Foam is generated by the air and starts to travel up the column. At a determined level of foam, antifoam is injected. By this method several antifoaming agents can be tested. A graph reporting foam height vs time is very helpful to establish the knockdown ability and the persistence for each product. The selected antifoam is the product with the best compromise between shock effect and durability       Environmental performance   Silicone antifo...
1 条评论
阅读全文

What is a defoamer / deaerator’s purpose in the system?

What is a defoamer / deaerator’s purpose in the system? Defoamers prevent formation of foam during manufacture and application of coatings and printing inks. Foam that is already formed is destroyed and air occlusions are prevented. Deaerators prevent development of air occlusions and pinholes. Why use a defoamer? The occurrence of foam is considered an undesirable but unavoidable phenomenon in coatings and printing inks. The formation of foam interrupts production processes, reduces the effective volumes in the production plant, and leads to unnecessary down time. Foam also interferes with the application process. In printing, foam can cause the ink reservoirs to overflow and can impair ink transfer from the printing cylinder to the substrate. Dried foam leaves surface defects in the paint film. To prevent foam and destroy any foam present, defoamers must be added to the formulation. defoamer vs. deaerator? To eliminate macro-foam on the surface, to prevent air occlusions, and...
发表评论
阅读全文

Defoamer Test Method

Defoamer testing methods are divided into dynamic defoaming and static defoaming tests. If your foaming environment is different, the recommended test methods are different. There are three main types of foam experiments to characterize the activity of defoamers. Persistence. As we have different experimental conditions in different laboratories and the experiments used in our research to obtain results from existing literature, we will introduce these experiments below. Other methods are sometimes used depending on the particular application. 1． Ross-Miles Foam Tester   Features: Tested for strong foaming environments. This experiment is widely used for characterization        (1) Foaming of surfactant solution        (2) Research and application of foam stability in the presence of defoamer In the foaming system, the defoaming performance test was carried out by circulating bubbling by a Ros...
发表评论
阅读全文